|
DESCRIPTION
FAIRSEAL P is polysulphide base
sealant of pourable consistency, which is
suitable for sealing horizontal joints and gives
excellent adhesion to most surfaces including
concrete, wood, glass, aluminium and stainless
steel. FAIRSEAL P comes in two part consisting
of base abd hardner. FAIRSEAL P may be applied
to joints between 5 mm to 50 mm wide.
APPARATUS
Electrically operated drill with
paddle attachment
Container
Cello tape
Steel Spatula
Back material (Rod)
Wire Brush
SURFACE
PREPARATION
-› All
joint surface should be thoroughly cleaned with
brush and then with
water & should be allowed to dry.
-› Stains
of oil and grease should be removed by wire
brushing and use
FM-DEGREASER.
-› FM
DEGREASER is solvent based cleaner and
degreaser, which easily
removes stains of oil and grease.
-› Apply
a coat of FAIRSEAL PRIMER on both sides of
joints, which gives
very strong electronic bond between joint and
sealer.
MIXING AND
APPLICATION
-› FAIRSEAL
P is supplied in two parts containing base and
hardener
prepacked in correct
proportion.
-› For
mixing of base and hardener, first the base is
taken in container
and hardner is added
slowly in base and is mixed with electrically
operated drill machine
with paddle attachment until uniform colour is
obtained.
-› The
mixing of base and hardener should be done
thoroughly because
many times failure of
sealant occurs due to improper mixing of
components.
-› Before
application of FAIRSEAL P, FAIRSEAL PRIMER
should be dry
initially.
-› After
proper mixing of FAIRSEAL, it should be poured
in joints drawing a
flat tool like stainless
steel spatula.
-› For
better finishing of SEALANT, it is recommended
to draw stainless
steel spatula coated with
kerosene.
-› FAIRSEAL
P sets within 18hrs at temperature 30-350C
and if
temperature is 250C,
it sets in 24hrs.
-› FAIRSEAL
P should be cured for 12 days at 30-350C
temperature and for
2 weeks if temperature is
250C.
-› The
quantity of FAIRSEAL P required per running
metre is calculated by
following equation.
Quantity = (1.6x bxd)/1000 kg. per running metre
Where b = width of joing in mm
D = depth of joint in mm
QUALITY ASSURANCE
Fairmate manufactures entire range of
construction chemicals under compliance of ISO
9001-2000, ISO (EMS) 14001 & OHSAS 18001
(Occupational Health and Safety) certified by
KPMG Peat Marwick.
TECHNICAL SERVICES
While new advances and changes will take place
one thing will never change is quality and
meeting special needs of customer. Our
laboratory in Baroda and technical personnel &
experts are available to provide additional
information and technical assistance. We are
eager to work with you in development of new
product and solve your problem.
| 