|
BENEFITS
-› Prepacked,
easy to use
-› High
Strength
-› Excellent
adhesion
-› Protects
Steel reinforcement
-› Can
be used for all kinds of concrete repairs
-› Chloride
free
PRODUCT
CEMSCREED R is a prepacked two component,
Polymer modified Cementitious repair system -
(Primer and over Lay).
PURPOSE
Designed for cost effective repairs to spalled
or damaged concrete and floors.
DESCRIPTION
CEMSCREED R is a prepacked two component system
consisting of ready to use polymer modified
mortar and polymer modified primer. The mortar
contains specially processed cement and polymer
with graded fillers and additives to impart
adhesion, strength and weather resistance.
USES
CEMSCREED R is to be used in conjunction with
CEMSCREED R PRIMER and is designed for repair of
spalled or damaged concrete, precast floors and
roads. Also as a render where durability or
increased weather resistance is required.
CEMSCREED R is ready to use for easy on-site
mixing. The mortar can be laid in thickness of
10-20 mm in single application and exhibits good
workability and finishing properties. CEMSCREED
R has excellent adhesion to substrate and
exhibits excellent bond & weather resistance
thus leading to increased durability and also
resists shrinkage induced cracking. CEMSCREED R
is chloride free.
PACKING &
COVERAGE
CEMSCREED R - 25 kg HDPE bags + 4.5 ltrs liquid
polymer. (Yields 12.5 ltrs).
CEMSCREED PRIMER - 2kg Powder + 1 Ltr liquid
(sufficient for 5 to 7 m2)
INSTRUCTION FOR
APPLICATION
SURFACE PREPARATION : Substrates should be
mechanically prepared by grit blasting or
scabbling to produce a clean rough exposed
aggregates for better mechanical key. Loose
particles, dust, contamination must be removed
and surface flooded with water to allow for
maximum absorption. The exposed steel, if any,
should be thoroughly cleaned by abrasive means
and all edges must be cut back to a thickness of
10-15 mm.
PRIMING
After ensuring that there is no surface water
present on the prepared surface, CEMSCREED
Primer is applied in a single even coat
application ensuring all corners, crevices,
joints are fully covered. Empty the powder
content of the primer into polymer content,
slowly whilst mixing continuously to obtain a
homogenous brushable creamy consistency primer
liquid, which is then applied to the surface and
the reinforcement.
MIXING &
LAYING OF CEMSCREED R
CEMSCREED R should preferably be mixed using a
paddle attached to an electric drill. Place the
liquid polymer into the container and slowly add
the powder whilst continuously mixing to obtain
a homogenous mix.
LAYING
Apply the mixed CEMSCREED R to the previously
primed surface while it is tacky and trowel
firmly to good compaction to the existing
profile at a maximum thickness of 20 mm at a
time. Multiple application will be necessary for
thicker sections (more than 20 mm)
CURING
Cover the repaired areas with a polythene sheet
for atleast 12 hours before water ponding or
curing by wet hessian should be carried out.
CLEANING
All tools must be cleaned with
water immediately after use.
HEALTH &
SAFETY
CEMSCREED R and CEMSCREED PRIMER are mildly
alkaline and any splashes should be washed off
with water.
QUALITY
ASSURANCE
Fairmate manufactures entire range of
construction chemicals under compliance of ISO
9001-2000, ISO (EMS) 14001 & OHSAS 18001
(Occupational Health and Safety) certified by
KPMG Peat Marwick.
TECHNICAL
SERVICES
While new advances and changes will take place
one thing will never change is quality and
meeting special needs of customer. Our
laboratory in Baroda and technical personnel &
experts are available to provide additional
information and technical assistance. We are
eager to work with you in development of new
product and solve your problem.
| 