FAIRPLAST IP
WATERPROOF PLASTER ADDITIVE

BENEFITS

-› Better consistency

-› Prolonged workability

-› Easier spreading of mortar and easy placing of bricks and blocks

-› Reduces mortar droppings from surface

-› Improves finish

-› Greater resistance to frost damage during construction

-› Protection against freeze-thaw damage after construction

-› Reduces permeability hence ensures waterproof plaster

-› Increased yield of mortar results into cost benefits

-› Reduces drying shrinkage cracks.

PRODUCT
FAIRPLAST IP is waterproof plaster additive available in powder form, for cement mortar, conforming to BS-4887 & IS - 2645 : Part-1 : 1999.

YIELD
FAIRPLAST IP will increase the yield of the mortar significantly. (depending on type of Sand).

PACKING & DOSAGE
200 gms pouch, 1 kg/5 kg/25kg HDPE bags. FAIRPLAST IP is supplied in powder form and should be drymixed into the mortar and water should be added as required slowly with continuous mixing.

DESCRIPTION
FAIRPLAST IP is supplied as ready to use powder which should be dry mix in mortar. It introduces air into mortar in the form of extremely fine and evenly dispersed bubbles. This entrained air imparts improved workability which, due to the stability of the tiny bubbles, prevents premature stiffening and avoids the need for repeated "knocking up". In the hardened mortar these minute bubbles provide a cautionary effect in screeds or renders. Capillary channels are also made discontinuous by the formation of the bubbles, thus reducing the penetration of water.
LIME MIXES : Addition of lime to cement mortar mix to improve plasticity can be completely omitted and replacement should be made with FAIRPLAST IP very economically

SHELF LIFE
24 months in original sealed containers, if stored under shed below 50⁰C.

HEALTH & SAFETY
FAIRPLAST IP is an industrial chemical, Avoid unnecessary contact with skin. In case of contact with eyes, splash plenty of water and seek medical advice immediately.

QUALITY ASSURANCE
Fairmate manufactures entire range of construction chemicals under compliance of ISO 9001-2000, ISO (EMS) 14001 & OHSAS 18001 (Occupational Health and Safety) certified by KPMG Peat Marwick.

TECHNICAL SERVICES
While new advances and changes will take place one thing will never change is quality and meeting special needs of customer. Our laboratory in Baroda and technical personnel & experts are available to provide additional information and technical assistance. We are eager to work with you in development of new product and solve your problem.