FAIRSCREED R
GENERAL PURPOSE EPOXY MORTAR

BENEFITS
-› Three pack factory controlled

-› Excellent abrasion and impact resistant

-› Early and Ultra high strength

-› Can be used as a repair material

-› Can be used as bedding mortar for tiles on uneven floors or under
   corrosive conditions.

PRODUCT
A high strength, epoxy resin mortar with excellent abrasion and impact strength properties. A blend of epoxy resin with specially graded fillers.

PACKING
7.5 Kg pack consist of Base, Hardner and aggregates.

COVERAGE
A 7.5 Kg pack will cover an area of approx. 0.75 sq. mtr at a thickness of 10mm.

WHERE TO USE
Repairs to spalled columns, soffits, gutters, lintels etc., Repairs of damaged concrete floors, spalled concrete roads and runways. Making good of damaged concrete kerbs, pipes and precast units. As a bedding mortar for tiles on uneven floors or under corrosive conditions.

PROPERTIES

COLOUR : Light Grey / Natural; WORKING LIFE : 1 hours at 30⁰C, COMPRESSIVE STRENGTH N/mm² : 7 days-67N/mm² at 30⁰C.
BOND CAPACITY : In dry conditions, FAIRSCREED R bonds extremely well to a cementitious surface previously primed with SAFECORE PRIMER. Average bond values in laboratory test approx. 5 N/mm².
TEMPERATURE RANGE : During application : 10⁰C to + 40⁰C; In Service : -20⁰C to +60⁰C.

HOW TO USE

Preparation : Surfaces should be sound, clean and free from loose particle, laitance and all contamination viz. oil, grease etc.

MIXING
FAIRSCREED R comprises of three components the resin base, hardener and aggregate which are supplied preweighed in the correct proportions. Pour the hardener into the resin can containing base mix throughly in a metal bucket by using a mechanical stirrer until a uniform colour is obtained. This liquid and the aggregate are throughly blended until a uniform colour is obtained.

PRIMING

The prepared concrete surface should be primed by the application of SAFECORE PRIMER epoxy resin which should be brushed well so that, it throughly wets the surface.
Application : Before the primer is hardener, i.e. within 1 hour of application, the FAIRSCREED R mortar should be applied by tamping and troweling, in successive layers not exceeding 15 mm in thickness in order to allow full compaction. Finally the mortar should be shaped to the desired profile and troweled to a smooth finish.

SHELF LIFE

At least one year in manufacturer's undamaged, sealed containers in dry conditions and out of direct sunlight.

HEALTH & SAFETY

Cleanliness when handling the resins is essential to prevent skin irritation.

QUALITY ASSURANCE
Fairmate manufactures entire range of construction chemicals under compliance of ISO 9001-2000, ISO (EMS) 14001 & OHSAS 18001 (Occupational Health and Safety) certified by KPMG Peat Marwick.

TECHNICAL SERVICES
While new advances and changes will take place one thing will never change is quality and meeting special needs of customer. Our laboratory in Baroda and technical personnel & experts are available to provide additional information and technical assistance. We are eager to work with you in development of new product and solve your problem.