|
BENEFITS
- Excellent
waterproofing.
- Low
viscosity highly penetrating.
- Quick
setting.
- Ultra
high strength.
- Easy
to apply.
- Excellent
bond strength to concrete brickwork and masonary.
- Suitable
for damp or dry surface.
- Excellent
flexibility and elongation water and weather resistance.
DESCRIPTION
FLOWGROUT PULV is a low viscosity polyurethane
base injection resin grout designed to seal
leaking cracks, voids or fractures in concrete
structures and stop running water.
TYPICAL
PROPERTIES
Typical
application:
To seal leaking cracks, voids or fractures in
concrete structures. The single component system
utilizes an accelerator to adjust the reaction
profiles as needed for job site conditions.
Typical properties-Liquid:
Viscosity, 25OF,
cps 500
Specific Gravity 1.15
Physical state liquid
Colour Amber
Typical properties- Cured:
Elongation, percent 44
Tensile strength, psi 2 Kg./cm2
Shear strength, psi 1.2 Kg./cm2
Water absorption (percent by volume) <1
APPLICATION
SURFACE PREPARATION : Drill Holes at an
approximate 45 degree angle, offset to intersect
the joint/crack at approximate mid-depth. Holes
shall be placed at appropriate intervals
typically 12 apart to ensure full infiltration
of the joint/crack with the FLOWGROUT PULV.
MIXING: Add the accelerator to FLOWGROUT PULV as
per the requirement and mix well without
entraining air into the mix. APPLICATION :Mix is
pumped through a piston pump capable of
producing discharge pressure of > 250 psi, until
mix is overflow from the crack or hole. Pumping
shall proceed from packer to packer, with
multiple passes on each hole until either stall
pressure is achieved or raw grout flow is
observed from the crack/joint subsequent to
pumping upto that hole. CLEANING : All excess
FLOWGROUT PULV GELFOAM shall be cleaned from the
area and properly disposed.
PACKING
1, 5, 200
kg. Carboy.
SHELF LIFE
FLOWGROUT
PULV GELFOAM will have a shelf life of 12 months
when kept in dry conditions at a temperature of
5OC
to 45OC.
Storage at higher temperatures and high humidity
may reduce the shelf life. If allowed to stand
sound for a long time, container should be
stirred well before use.
HEALTH & SAFETY
If skin contact occurs wash thoroughly with
clean water & if eye contact occur immediately
clean with plenty of clean water and seek
medical advice. Full health & safety details are
gives in product safety data sheet.
QUALITY ASSURANCE
Fairmate manufactures entire range of
construction chemicals under compliance of ISO
9001-2000, ISO (EMS) 14001 & OHSAS 18001
(Occupational Health and Safety) certified by
KPMG Peat Marwick.
TECHNICAL SERVICES
While new advances and changes will take place
one thing will never change is quality and
meeting special needs of customer. Our
laboratory in Baroda and technical personnel &
experts are available to provide additional
information and technical assistance. We are
eager to work with you in development of new
product and solve your problem. | 