ROADCRETE L
A FAST SETTING, CEMENTITIOUS,
LARGE SECTION ROAD REPAIR CONCRETE

BENEFITS

-› Excellent bond to concrete substrate

-› Great impact resistance than standard concrete

-› High strength

-› It will not shrink and ensure the positive expansion for better grip with

    old concrete surface

-› Fast setting

-› It can be applied over existing concrete floor and road

-› Easy to use

-› Cost effective road repair mortar open for the traffic for shortage timing

-› It will improves adhesion, abrasion and durability

-› It will not peel , crumble, dust or crack permanent repair to spalled &

    damaged road

-› Freeze thaw durability better than standard concrete.

USES

Repair to large section damaged concrete road, floors spalled concrete, gutters, support of road furniture etc.

DESCRIPTION

ROADCRETE L is a single part cementitious fast setting large section road repair concrete composed of a factory controlled blend of special Portland cement, aggregates and specially additives. It is a fast setting, high strength, trowel applied mortal designed for large section damaged road repair concrete. Its rapid set characteristics allow a fast return of the road to traffic. The product is chloride free and can be safety used in contact with reinforcing steel.

TYPICAL PROPERTIES

Colour : Grey powder; working life : 10 minutes ; Setting time: Initial setting time = 30 mins + 10 mins at 30⁰C
Final setting time = 90 mins + 10 mins at 30⁰C
Compressive strength at W/P ratio = 0.12

Compressive strength at W/P ratio = 0.16

APPLICATION

SURFACE PREPARATION : All lose particle should be removed by wire brush & prewet the surface thoroughly and excess water to be removed.
PRIMER : ROADCRETE PRIMER to be applied by brush. Allow ROADCRETE PRIMER coat to become tacky, approximaterly 10 minutes @ 30⁰C. Apply mortar before the priming coat has dried.
MIXING : Pour the measured gauging water into a suitable mixing vessel and slowly add the powder to the water. Whilst continuously mixing 25 kg of ROADCRETE L will require 4 ltrs. Water. Mix using a mechanically stirrer e.g. Electric drill with paddle attachment until the material is uniform mixed.
APPLICATION : Apply the mixed patching mortar to pre treated area. Trowel like regular concrete until desired finish. The mortar can be placed in section of 50mm to 100mm in thickness. After placement no special curing is required in moderate ambient conditions.
LAYING : Minimum thickness 50 mm.
CURING : No curing is required.
USAGE OF THE ROAD : Within two hours for the traffic.

PACKING & COVERAGE

ROADCRETE L is supplied 25 kg packs A 25 kg pack yield 12.5 ltr of mortars sufficient for 0.75m²@ 25 mm thick. 

PACKING & COVERAGE

ROADCRETE is supplied 25 kg packs A 25 kg pack yield 12.5 ltr of mortars sufficient for 0.75m²@ 25 mm thick.

SHELF LIFE

9 Months if stored in a dry enclosed area in un opened.

QUALITY ASSURANCE

Fairmate manufactures entire range of construction chemicals under compliance of ISO 9001-2000, ISO (EMS) 14001 & OHSAS 18001 (Occupational Health and Safety) certified by KPMG Peat Marwick.

TECHNICAL SERVICES

While new advances and changes will take place one thing will never change is quality and meeting special needs of customer. Our laboratory in Baroda and technical personnel & experts are available to provide additional information and technical assistance. We are eager to work with you in development of new product and solve your problem.