|
BENEFITS
-› Excellent
bond to concrete substrate
-› Self
compacting.
-› Impact
& Abrasion resistance.
-› Fast
setting.
-› It
can be applied over existing concrete floor and
road
-› Easy
to use.
-› Cost
effective road repair mortar.
-› Open
for the traffic for shortage timing.
-› It
will improves adhesion, abrasion and durability.
-› It
will not peel, crumble, dust or crack.
-› Permanent
repair to spalled & damaged road.
-› Freeze
thaw durability better than standard concrete.
USES
Repair to damaged concrete,
floors & damaged road
DESCRIPTION
ROADCRETE SL is a single part
fast setting self compacting road repair mortar.
Composed of a factory controlled blend of
specially port land cement, fine aggregates and
specially additives. It is a fast setting, high
strength, self compacting Road repair mortar.
The product is chloride free can be safely used
incontact with reinforcing steel.
TYPICAL PROPERTIES
Colour : Grey powder; working
life : 20 minutes ; setting time : 50 minutes.
COMPRESSIVE STRENGTH :
APPLICATION
SURFACE PREPARATION : All lose
particle should be removed by wire brush &
prewet the surface thoroughly and excess water
to be removed.
PRIMER : ROADCRETE PRIMER to be applied by
brush. Allow the ROADCRETE PRIMER coat to become
tacky, approximately 10 minutes @ 30oC. Apply
mortar before the priming coat has dried.
MIXING : Pour the measured gauging water into a
suitable mixing vessel and slowly add the powder
to the water. Whilst continuously mixing 25 kg
of ROADCRETE SL will require 4 ltrs. Water. Mix
using a mechanically stirrer e.g. Electric drill
with paddle attachment until the material is
uniform mixed.
APPLICATION : Pour the mixed patching mortar to
pre treated area. The patching mortar will be
self levelled.
LAYING : Minimum thickness 50 mm.
CURING : No curing is required.
USAGE OF THE ROAD : Within two hours for the
traffic.
PACKING &
COVERAGE
ROADCRETE SL is supplied 25 kg
packs A 25 kg pack yield 12.5 ltr of mortars
sufficient for 0.75m2@
25 mm thick.
SHELF LIFE
9 Months if stored in a dry
enclosed area in un opened.
QUALITY ASSURANCE
Fairmate manufactures entire
range of construction chemicals under compliance
of ISO 9001-2000, ISO (EMS) 14001 & OHSAS 18001
(Occupational Health and Safety) certified by
KPMG Peat Marwick.
TECHNICAL
SERVICES
While new advances and changes
will take place one thing will never change is
quality and meeting special needs of customer.
Our laboratory in Baroda and technical personnel
& experts are available to provide additional
information and technical assistance. We are
eager to work with you in development of new
product and solve your problem. | 