SAFECORE CE (S)
HIGH BUILD TAR EXTENDED EPOXY COATING

BENEFITS

-› Excellent resistance to water and chemicals

-› Flexible

-› Cost effective

-› Can be easily applied.

-› Reduces toxicity

-› Excellent anti-corrosive properties.

TYPICAL USES

Chemical bonds, sewage treatment works, effluent plants, non-slip flooring, anticorrosive protection of steelwork.

DESCRIPTION

SAFECORE CE (S) is based on a solvent based Epoxy Resin system modified with a hydrocarbon resin, derived from coal tar.
This modified tar is free from pitch and hence represents a low hazard during use. i.e. SAFECORE CE (S) is much more user friendly than conventional Pitch Epoxy Coatings.
SAFECORE CE (S) is supplied as a two pack material in preweighed quantities ready for mixing and use.

TYPICAL PROPERTIES

Colour : Black ; Pot Life : 60 minutes at 30^OC ; Tack free time : 16 hours at 30^OC ; Hard dry timE : 24 hours at 30^OC ; Full cure time : 7 days at 3^OC ; Recommended dry film thickness : 200-250 micron/two coat ; Tensile strength : 9N/mm² ; Elongation at break : 50% ; Chemical resistance : Excellent resistance to long term immersion in the following : 25% hydrochloric acid, 50% sulphuric acid, 10% nitric acid, 25% sodium hydroxide, petrol.
INSTRUCTION FOR APPLICATION
1) Surface Preparation :
All surfaces to be treated with SAFCORE CE (S) should be sound, clean and free from dust, dirt grease and other contaminants.
A) Concrete Substrates :
New concrete shall be allowed to cure for a minimum of 21 days. Laitance shall be removed, preferably by grit blasting. Any honeycombing, blow holes etc. shall be filled using FAIRSCREED VF pores concrete, apply one coat of SAFECORE EP PRIMER on porous concrete surface.
B) Steel Substrates :
Steel structures should be free from Rust. Old structures should be sand blasted.

MIXING

The entire contents of the Base container should be emptied into that containing the Hardner component, and both the materials mixed thoroughly to achieve uniform consistency.
Mechanical mixing is prefered e.g. low speed electric drill with paddle attachment.

APPLICATION

Apply SAFECORE CE (S) by brush or roller. Following overnight cure a second coat may be applied.

PACKING & COVERAGE

5 kg pack.

A 5 kg pack will be sufficient to coat 12 to 14m² with the recommended minimum d.f.t. of 200-250 microns.

STORAGE & SHELF LIFE

Store in dry conditions out of direct sunlight at temperatures between 10^OC and 30^OC. SAFECORE CE (S) has a minimum shelf life of 9 months when stored in original, unopened containers in accordance with the manufacturers instructions.

LIMITATIONS

Do not apply to wet or uncured concrete surfaces. Do not apply at temperatures below 5^OC.

HEALTH & SAFETY

Avoid contact with skin and eyes by use of suitable protective clothing and goggles. All splashes to the skin should be immediately washed off with soap and water. If contact with the eyes occur, then irrigate with copious quantities of clean water, and seek medical advice.

QUALITY ASSURANCE

Fairmate manufactures entire range of construction chemicals under compliance of ISO 9001-2000, ISO (EMS) 14001 & OHSAS 18001 (Occupational Health and Safety) certified by KPMG Peat Marwick.

TECHNICAL SERVICES

While new advances and changes will take place one thing will never change is quality and meeting special needs of customer. Our laboratory in Baroda and technical personnel & experts are available to provide additional information and technical assistance. We are eager to work with you in development of new product and solve your problem.